Cricket

CRICKET

The one and only place you need to be to check up on all the latest cricket info, latest international cricket news, and everything you need to know about the world of cricket.

Forms of cricket

Test cricket

Test cricket is a form of international cricket started in 1877 during the 1876/77 English cricket team's tour of Australia. The first Test match began on 15 March 1877 and had a timeless format with four balls per over. It ended on 19 March 1877 with Australia winning by 45 runs. The Test cricket series between England and Australia is called The Ashes. Since then, over 1,800 Test matches have been played and the number of Test playing nations has increased to ten with Bangladesh, the most recent nation elevated to Test status, making its debut in 2000. Test matches are two innings per side, and nowadays, over a period of up to a maximum of five days - although matches are sometimes completed with a day or even two to spare. In the past, Tests have been played over 3, 4, or 6 days, and some have been 'Timeless' - played to a finish. Tests that are not finished within the allotted time are drawn.

One-day cricket

Limited overs matches, also known as one day cricket or instant cricket, were introduced in the English domestic season of 1963 in response to demands for a shorter and more dramatic form of cricket. One-day, single-innings, matches often took place before this, but the innovation was the limiting of each side's innings to an agreed number of overs (nowadays usually 50). The idea was taken up in the international arena in 1971, during England's tour of Australia, when a match was played on the scheduled fifth day of the rained-off third Test. The one-day game has since become a crowd-pleaser and TV-audience-generator across the globe, hastened in part by the success of the inaugural World Cup in 1975. The abbreviations ODI (One-Day International) or sometimes LOI (Limited Overs International) are used for international matches of this type. Innovations have included the introduction of coloured clothing, distinct tournaments, and "day-night" matches (where play extends into the night under floodlights); together with frequent nail-biting finishes and the impossibility of either side opting to play for a draw, these have seen ODI cricket gain many supporters.

Twenty20 Cricket

Twenty20 Cricket was first played in English domestic cricket in 2003 to popularise first-class cricket and attract more spectators. It has since spread to many other countries. A "Twenty20 Game" consists 20 overs for each side, a free-hit after a no-ball is bowled, short boundaries, batting-friendly pitches, and other rules designed to attract crowds that would not be willing to sit through the slower-paced one-day games or test matches. The first men's Twenty20 international was between Australia and New Zealand in 2005, the first women's Twenty20 international having been between England and New Zealand in 2004. The ICC announced after its Executive Board meeting in March 2006 that beginning from 2007 to 2015, the Twenty20 World Championship would be held every two years, the first ever Twenty20 World Championship to be held in South Africa in 2007.

Cricket is a bat-and-ball sport contested by two teams, usually of eleven players each. A cricket match is played on a grass field, roughly oval in shape, in the centre of which is a flat strip of ground 22 yards (20.12 m) long, called a pitch. At each end of the pitch is a construction of three parallel wooden stakes (known as stumps) driven vertically into the ground, with two small crosspieces (known as bails) laid across the top of them. This wooden structure is called a wicket.

The bowler, a player from the fielding team, hurls a hard, fist-sized, cork-centred, leather-covered ball from the vicinity of one wicket towards the other. The ball usually bounces once before reaching the batsman, a player from the opposing team. In defence of the wicket, the batsman plays the ball with a wooden cricket bat. Meanwhile, the other members of the bowler's team stand in various positions around the field as fielders, players who retrieve the batted ball in an effort to stop the batsman scoring, and if possible to get him or her out. The batsman, if he or she does not get out (for example if the bowled ball hits the wicket, or if a fielder catches the ball off the bat before it bounces), may run between the wickets, exchanging ends with a second batsman (the non-striker), who has been waiting near the bowler's wicket. Each completed exchange of ends scores one run, and the match is won by the team that scores more runs.

Cricket has been an established team sport for hundreds of years. It originated in its modern form in England and is most popular in the present and former members of the Commonwealth. Cricket is the second most popular sport in the world. More than a hundred cricket-playing nations are recognised by the International Cricket Council. In the countries of South Asia, including India, Pakistan, Bangladesh and Sri Lanka, cricket is the most popular sport. It is also a major sport in England and Wales, Australia, New Zealand, South Africa, Zimbabwe and the English-speaking countries of the Caribbean, which are collectively known in cricketing parlance as the West Indies. There are also well-established amateur club competitions in countries as diverse as the Netherlands, Kenya, Nepal and Argentina, among others.

The sport is followed with passion in many different parts of the world. It has even occasionally given rise to diplomatic outrage, the most notorious being the Basil D'Oliveira affair which led to the banning of South Africa from sporting events. Other examples include the Bodyline series, played between England and Australia in the early 1930s, and the 1981 underarm bowling incident involving Australia and New Zealand.

The aim of the batting team is to score as many runs as possible. A run is scored when both batsmen successfully move to their respective opposite ends of the pitch (the pitch is sometimes referred to as the "wicket", a term with multiple meanings). (The batsmen will usually only attempt to score runs after the striker has hit the ball, but this is not required by the rules - the batsmen can attempt runs at any time after the ball has been bowled.) Runs are also scored if the batsman propels the ball to the boundary of the playing area (scoring six runs if the ball crosses the boundary without having touched the ground or four runs otherwise), or if the bowler commits some technical infringement.

The aim of the bowler's team is to get each batsman out (this is a wicket, or a dismissal). Dismissals are achieved in a variety of ways. The most direct way is for the bowler to bowl the ball in such a way that it hits the stumps, dislodging the bails. While the batsmen are attempting a run, the fielders may attempt to dismiss either batsman by using the ball to knock the bails off the set of stumps to which the batsman is closest, before he has grounded himself or his bat in the crease. Other ways for the fielding side to dismiss a batsman include catching a struck ball before it touches the ground, or having the batsman adjudged LBW (leg before wicket, i.e. attempting to block the ball from hitting the stumps using his body, which is prohibited). Once the batsmen are not attempting to score any more runs, the ball is "dead" and is bowled again (each attempt at bowling the ball is a ball or a delivery).

The game is divided into overs of six (legal) balls. At the end of an over, the batting and bowling ends will be swapped, and the bowler replaced by another member of the fielding side. The two umpires also change positions at this time (the umpire previously at square-leg becomes the bowler's umpire at what is now the bowling end, and vice versa), and the fielding positions are rearranged.

Once out, a batsman is replaced by the next batsman in the team's line-up. (The batting side can reorder their line-up at any time, but no batsman may bat twice in one innings.) The innings (singular) of the batting team ends when the tenth batsman is given out, since there always must be two batsmen on the field. When this happens, the team is said to be all out. (In limited overs cricket the innings ends either when the batting team is all out or a predetermined number of overs has been bowled.) At the end of an innings, the two teams exchange roles, the fielding team becoming the batting team and vice versa.

A team's score is reported in terms of the number of runs scored and the number of batsman that have been dismissed. For example, if five batsmen have been given out and the team has scored 224 runs, they are said to have scored 224 for the loss of 5 wickets (shortened to "224 for 5" and written 224/5 or, in Australia, "5 for 224" and 5/224).

The team that has scored more runs at the end of the completed match wins. Different varieties of the game have different definitions of "completion"; for instance there may be restrictions on the number of overs, the number of innings, and the number of balls in each innings.

If the team that bats last has all of its batsmen dismissed before it can reach the run total of the opposing team, it is said to have lost by (n) runs (where (n) is the difference between the two run totals). If however, the team that bats last exceeds the opposing team's run total before its batsmen are dismissed, it is said to have won by (n) wickets, where (n) is the difference between the number of wickets conceded and 10.

If, in a two-innings-a-side match, one team's combined first and second innings total fails to reach its opponent's first innings total, there is no need for the opposing team to bat again and it is said to have won by an innings and (n) runs, where (n) is the difference between the two teams' totals.

If all the batsmen of the team batting last are dismissed with the scores exactly equal then the match is a tie; ties are very rare in matches of two innings a side. In the traditional form of the game, if the time allotted for the match expires before either side can win, then the game is a draw.

If the match has only a single innings per side, then a maximum number of deliveries for each innings is often imposed. Such a match is called a limited overs or one-day match, and the side scoring more runs wins regardless of the number of wickets lost, so that a draw cannot occur. If this kind of match is temporarily interrupted by bad weather, then a complex mathematical formula known as the Duckworth-Lewis method is often used to recalculate a new target score. A one-day match can be declared a No-Result if fewer than a previously agreed number of overs have been bowled by either team, in circumstances that make normal resumption of play impossible - for example, an extended period of bad weather.

The game is played in accordance with 42 laws of cricket, which have been developed by the Marylebone Cricket Club in discussion with the main cricketing nations. Teams may agree to alter some of the rules for particular games. Other rules supplement the main laws and change them to deal with different circumstances. In particular, there are a number of modifications to the playing structure and fielding position rules that apply to one innings games that are restricted to a set number of fair deliveries.

Players

A team consists of eleven players. Depending on his or her primary skills, a player may be classified as a specialist batsman or bowler. A balanced team usually has five or six specialist batsmen and four or five specialist bowlers. Teams nearly always include a specialist wicket-keeper because of the importance of this fielding position. Of late, the role of specialist fielder has also become important in a team. Each team is headed by a Captain who is responsible for making tactical decisions such as determining the batting order, the placement of fielders and the rotation of bowlers.

A player who excels in both batting and bowling is known as an all-rounder. One who excels as a batsman and wicket-keeper is known as a wicket-keeper/batsman, sometimes regarded as a type of all-rounder. True all-rounders are rare and valuable players; most players focus on either their batting or their bowling.

Umpires

Two on-field umpires preside over a match. One umpire (the bowler's umpire) will stand behind the wicket at the end from which the ball is bowled, and adjudicate on most decisions. The other (the square leg umpire) will stand near the fielding position called square leg, which offers a side view of the batsman, and assist on decisions for which he or she has a better view. In some professional matches, they may refer a decision to an off-field third umpire, who has the assistance of television replays. In international matches an off-field match referee ensures that play is within the laws of cricket and the spirit of the game.

Scorers

Two scorers are appointed; most often one is provided by each team. The laws of cricket specify that the official scorers are to record all runs scored, wickets taken and (where appropriate) overs bowled. They are to acknowledge signals from the umpires, and to check the accuracy of the score regularly both with each other and, at playing intervals, with the umpires. In practice scorers also keep track of other matters, such as bowlers' analyses, the rate at which the teams bowl their overs, and team statistics such as averages and records. In international and national cricket competitions, the media often require notification of records and statistics, so unofficial scorers often keep tally for broadcast commentators and newspaper journalists. The official scorers occasionally make mistakes, but unlike umpires' mistakes these can be corrected after the event.

The Playing Field

The cricket field consists of a large circular or oval-shaped grassy ground. There are no fixed dimensions for the field but its diameter usually varies between 450 feet (137 m) and 500 feet (150 m). On most grounds, a rope marks the perimeter of the field and is known as the boundary.

The Pitch

Most of the action takes place in the centre of this ground, on a rectangular clay strip usually with short grass called the pitch. The pitch measures 10 × 66 feet (3.05 × 20.12 m).
At each end of the pitch three upright wooden stakes, called the stumps, are hammered into the ground. Two wooden crosspieces, known as the bails, sit in grooves atop the stumps, linking each to its neighbour. Each set of three stumps and two bails is collectively known as a wicket. One end of the pitch is designated the batting end where the batsman stands and the other is designated the bowling end where the bowler runs in to bowl. The area of the field on the side of the line joining the wickets where the batsman holds his bat (the right-hand side for a right-handed batsman, the left for a left-hander) is known as the off side, the other as the leg side or on side.

Lines drawn or painted on the pitch are known as creases. Creases are used to adjudicate the dismissals of batsmen and to determine whether a delivery is legal.

Parts of the Field

For a one-innings match played over a set number of fair deliveries, there are two additional field markings. A painted oval is made by drawing a semicircle of 30 yards (27.4 m) radius from the centre of each wicket with respect to the breadth of the pitch and joining them with lines parallel, 30 yards (27.4 m) to the length of the pitch. This line, commonly known as the circle, divides the field into an infield and outfield. Two circles of radius 15 yards (13.7 m), centred on each wicket and often marked by dots, define the close-infield. The infield, outfield, and the close-infield are used to enforce fielding restrictions.

Placement of Players

The team batting always has two batsmen on the field. One batsman, known as the striker, faces and plays the balls bowled by the bowler. His or her partner stands at the bowling end and is known as the non-striker.

The fielding team has all eleven of its players on the ground, and at any particular time, one of these will be the bowler. The player designated as bowler must change after every over. The wicket-keeper, who generally acts in that role for the whole innings, stands or crouches behind the wicket at the batting end. The captain of the fielding team spreads his or her remaining nine players — the fielders — around the ground to cover most of the area. Their placement may vary dramatically depending on strategy. Each position on the field has a unique label.

Match Structure

The toss:
The two opposing captains toss a coin before the match, and the captain who wins chooses either to bat or bowl first. The captain's decision will be based on whether the team's bowlers are likely to gain immediate advantage from the pitch and weather conditions (these can vary significantly), or whether it is more likely that the pitch will deteriorate and make batting more difficult later in the game.

Overs

Each innings is divided into overs, each consisting of six consecutive legal deliveries bowled by the same bowler. After completing an over, the bowler must take up a fielding position and let another player take over the bowling.

After every over, the batting and bowling ends are swapped, and the field positions are adjusted. The umpires swap so the umpire at the bowler's end moves to square leg, and the umpire at square leg moves to the new bowler's end.

End of an Innings

An innings is completed if:

Ten out of eleven batsmen are 'out' (dismissed) — the team are said to be all out
The team has only one batsman left who can bat (the others being incapacitated either through injury, illness or absence) — again, the team are said to be all out
The team batting last reaches the score required to win the match
The predetermined number of overs are bowled (in a one-day match only, usually 50 overs)
A captain declares his team's innings closed (this does not apply to one-day limited over matches)

Playing Time

Typically, two-innings matches are played over three to five days with at least six hours of cricket played each day. One-innings matches are usually played over one day for six hours or more. There are formal intervals on each day for lunch and tea, and shorter breaks for drinks, where necessary. There is also a short interval between innings.

The game is only played in dry weather. Additionally, because in professional cricket it is common for balls to be bowled at over 90 mph (144 km/h), the game must be played in daylight good enough for a batsman to be able to see the ball. Play is therefore halted during rain (but not usually drizzle) and when there is bad light. Some one-day games are now played under floodlights but, apart from a few experimental games in Australia, floodlights are not used in longer games. Professional cricket is usually played outdoors. These requirements mean that in England, Australia, New Zealand, South Africa and Zimbabwe the game is usually played in the summer. In the West Indies, India, Pakistan, Sri Lanka and Bangladesh games are played in the winter. In these countries the hurricane and monsoon season coincides with summer.

Batting and Scoring Runs

Batsmen strike the ball from the batting crease, with the flat surface of a wooden bat. If the batsman hits the ball with his bat, it is called a shot (or stroke). If the ball brushes the side of the bat it is called an edge or snick. Shots are named according to the style of swing and the direction aimed. As part of the team's strategy, the player may bat defensively, blocking the ball downwards, or aggressively, hitting the ball hard to empty spaces in order to score runs. There is no requirement to run if the ball is struck. The batsman also automatically scores runs if he manages to hit the ball to the boundary.

Batsmen come in to bat in a batting order, decided by the team captain. The first two positions, the "openers", face the most hostile bowling, from fast bowlers at their freshest and with a new ball. After that, the team typically bats in descending order of batting skill, the first five or six batsmen usually being the best in the team. Then follow the all-rounders — bowlers or wicket-keepers who can bat decently — and finally the pure bowlers who rarely score well. This order may be changed at any time during the course of the game.

Run scoring

To score a run, a striker must run to the opposite end of the pitch, while his non-striking partner runs to his end. To register a run, both runners must touch the ground behind the popping crease with either their bats or their bodies (the batsmen carry their bats as they run). If the striker hits the ball well enough, the batsmen may double back to score two or more runs. This is known as running between wickets. However, no rule requires the batsman to run upon striking the ball. The decision to attempt a run is made by the batsman who has the better view of the ball's position and is communicated by a system of calls: "yes", "no" or "wait". If the batsmen score an odd number of runs, then they will have swapped ends and their roles as striker and non-striker will be reversed for the next ball, unless the most recent ball marks the end of an over.

If a fielder knocks the bails off the stumps with the ball while no part of the batsman is grounded behind the popping crease, the nearer batsman is run out. (For this purpose, "batsman" includes the bat so long as he is holding it.)

If the ball reaches the boundary, then runs are automatically scored. A ball that goes over the boundary on the full (without touching the ground) automatically scores six runs; a ball that reaches the boundary after having touched the ground automatically scores four runs. These are scored instead of any runs the batsmen may have already run, and they return to the ends at which they started, except in the unlikely event that the batsmen have already scored more runs than they would receive for the boundary.

Extras

Every run scored by the batsmen contributes to the team's total. A team's total also includes a number of runs which are unaccredited to any batsmen. These runs are known as extras, apart from in Australia where they are also called sundries. Extras consist of byes, leg byes, no balls, wides and penalty runs. Byes and leg byes can be scored if the batsman misses making contact with bat and ball; while no-balls and wides are types of fouls committed by the bowler. For serious infractions such as tampering with the ball, deliberate time-wasting, and damaging the pitch, the umpires may award penalty extras to the opposition: in each case five runs. Five penalty runs are also awarded if a fielder uses anything other than his body to field the ball, or if the ball hits an object - a protective helmet, for example - left on the field by the fielding team. A team need not be batting in order to receive penalty extras.

Bowling and dismissals

A bowler delivers the ball toward the batsmen, using what is known as a bowling action: the elbow may be held at any angle and may bend further, but may not straighten out during the action. If the elbow straightens, it is an illegal throw and the delivery is called a no-ball. Under new cricketing law, after consultation with health experts, the bowler is allowed to straighten his arm 15 degrees or less; if the bowler straightens his arm more than 15 degrees it is called a "no ball".

Usually, the bowler pitches the ball so that it bounces before reaching the batsman. Some part of the bowler's front foot in the delivery stride (that is, the stride when the ball is released) must be behind the popping crease to avoid a no-ball (although the bowler's front foot does not have to be grounded). The ball must also be delivered so it is within the batsman's reach; otherwise it is termed a wide. A wide cannot be called if the batsman hits the ball. A wide or no-ball results in an extra run being added to the batting team's score and an extra ball being bowled in the over.

The bowler's primary goal is to take wickets; that is, to get a batsman out or dismissed. When a bowler succeeds in dismissing the more accomplished batsmen on the opposing team he reduces the opportunity for the batting team to score, as it exposes the less skillful non-specialist batsmen. The bowler's secondary task is to limit the numbers of runs scored. There are two main kinds of bowlers: pace bowlers, who attempt to bowl the ball too quickly for the batsman to properly react, and spin bowlers who bowl slower deliveries that bounce and curve in unpredictable ways.

Dismissal of a batsman

There are ten ways in which a batsman may be dismissed. Once a batsman is dismissed, he leaves the field to be replaced by another batsman. When the tenth batsmen is out, and only one batsman remains undismissed, the side is "all out" and the innings is over.

Many modes of dismissal require the wicket to be "put down". The wicket is put down if a bail is dislodged from the top of the stumps; or if a stump is struck out of the ground either by the ball or by a fielder using the hand in which the ball is being held. Of the following ten modes of dismissal, the first six are common, while the last four are technicalities that rarely occur. The ten modes are:

Caught — When a fielder catches the ball before it bounces and after the batsman has struck it with the bat or it has come into contact with the batsman's glove while it is in contact with the bat handle. The bowler and catcher are both credited with the dismissal. (Law 32)
Bowled — When a delivered ball hits the stumps at the batsman's end, and dislodges one or both of the bails. This happens regardless of whether the batsman has edged the ball onto the stumps or not. The bowler is credited with the dismissal. (Law 30)
Leg before wicket (lbw) — When a delivered ball misses the bat and strikes the batsman's leg, pad or body, and the umpire judges that the ball would otherwise have struck the stumps. The laws of cricket stipulate certain exceptions. For instance, a delivery pitching outside the line of leg stump should not result in an lbw dismissal, while a delivery hitting the batsman outside the line of the off stump should result in an lbw dismissal only if the batsman makes no attempt to play the ball with the bat. The bowler is credited with the dismissal.
Run out — When a fielder, bowler or wicket-keeper removes one or both of the bails with the ball by hitting the stumps whilst a batsman is still running between the two ends. The ball can either hit the stumps directly or the fielder's hand with the ball inside it can be used to dislodge the bails. Such a dismissal is not officially credited to any player, although the identities of the fielder or fielders involved are often noted in brackets on the scorecard.
Stumped — When the batsman leaves his crease in playing a delivery, voluntarily or involuntarily, but the ball goes to the wicket-keeper who uses it to remove one or both of the bails through hitting the bail(s) or the wicket before the batsman has remade his ground. The bowler and wicket-keeper are both credited. This generally requires the keeper to be standing within arm's length of the wicket, which is done mainly to spin bowling. (Law 39)
Hit wicket — When the batsman accidentally knocks the stumps with either the body or the bat, causing one or both of the bails to be dislodged, either in playing a shot or in taking off for the first run. The bowler is credited with the dismissal. (Law 35)
Handled the ball — When the batsman deliberately handles the ball without the permission of the fielding team. No player is credited with the dismissal. (Law 33)
Hit the ball twice — When the batsman deliberately strikes the ball a second time, except for the sole purpose of guarding his wicket. No player is credited with the dismissal. (Law 34)
Obstructing the field — When a batsman deliberately hinders a fielder attempting to field the ball. No player is credited with the dismissal. (Law 37)
Timed out — When a new batsman takes more than three minutes to take his position in the field to replace a dismissed batsman (If the delay is protracted, the umpires may cause the match to be forfeited). This rule prevents the batting team using time limits of the game to unfair advantage. No player is credited with the dismissal. (Law 31)
Additionally, a batsman may leave the field without being dismissed. For instance, if he is injured or taken ill, this is known as retired hurt or retired ill. The batsman is not out; he may return to bat later in the same innings if sufficiently recovered. Also, an unimpaired batsman may retire, in which case he is treated as being dismissed retired out; no player is credited with the dismissal.

Batsmen cannot be out bowled, caught, leg before wicket, stumped or hit wicket off a no ball. They cannot be out bowled, caught, leg before wicket, or hit the ball twice off a wide.

Some of these modes of dismissal can occur without the bowler bowling a delivery. The batsman who is not on strike may be run out by the bowler if he leaves his crease before the bowler bowls, and a batsman can be out obstructing the field or retired out at any time. Timed out is, by its nature, a dismissal without a delivery. With all other modes of dismissal, only one batsman can be dismissed per ball bowled.

Fielding and wicket-keeping

Fielders assist the bowlers in preventing runs, either by taking catches to dismiss a batsman, or by intercepting the ball and returning it, possibly running out the batsman. The wicket-keeper is the only fielder permitted to wear gloves. A fielder may stop the ball with any part of his body.

The wicket-keeper is a specialist fielder who stands behind the batsman's wicket throughout the innings. His primary job is to gather deliveries that the batsman fails to hit, to prevent them running into the outfield, which would enable batsmen to score byes. To this end, he wears special gloves (he is the only fielder allowed to do so) and pads to cover his lower legs. Owing to his position directly behind the striker, the wicket-keeper has a good chance of getting a batsman out caught off a fine edge from the bat; thicker edges are typically handled by the "slips" fieldsmen. The wicket-keeper is also the only person who can get a batsman out stumped.

Captain

The captain's acumen in deciding the strategy is sometimes crucial to the team's success. The captain makes a number of important decisions, including setting fielding positions, alternating the bowlers and taking the toss. Before the start of play the captains of the opposing teams meet and toss a coin; the winner of the toss decides which team will bat first. This decision, made in consideration of pitch conditions, the weather and the relative bowling and batting abilities of the two sides, can have an enormous impact on the course of play. In One-Day Internationals the captain also decides when to make use of Powerplay 2 and 3.

A Runner

In the event of a batsman being fit to bat but too injured to run, the umpires and the fielding captain may allow another member of the batting side to be a runner. If possible, the runner must already have batted. The runner's only task is to run between the wickets instead of the injured batsman. The runner is required to wear and carry exactly the same equipment as the incapacitated batsman.

First-class Matches

A first-class match is generally defined as a high-level international or domestic match that takes place over at least three days on natural (as opposed to artificial) turf. First-class games are two innings per side. Like Test matches, if the game is not completed over the allotted time then it is drawn. Games where the teams have only one innings each are not first-class (including one-day internationals).

A two-innings match of at least three days duration is granted first-class status only if both teams have first-class status. For example, Test matches, other games between two Test nations, games between two domestic teams deemed first-class in countries holding full membership of the ICC, and games between a Test nation's national side (or a team drawn from a national touring squad) and a first-class domestic team from a Test nation, are usually deemed to be first class. Matches between Kenya, one of the leading associate members of the ICC, and another team adjudged first-class are usually granted first-class status, but domestic matches in Kenya are not.

Among cricket statisticians, first class cricket is variously deemed to have started in 1660, 1772, 1801, 1815 or 1864. This ongoing controversy is described in the main article. The limited overs equivalent of first-class status is list A status.

International Structure

Cricket is the second most popular sport in the world. More than 120 cricket-playing nations are recognised by the International Cricket Council. In the countries of South Asia, including India, Pakistan, Bangladesh, Afghanistan, Nepal and Sri Lanka, cricket is the most popular sport. Similarly, it is the most popular sport in Australia, United Arab Emirates, Bermuda, Cayman Islands and the English-speaking countries of the Caribbean, which are collectively known in cricketing parlance as the West Indies. Cricket is also the national sport of England and The Bahamas, and a major sport in the countries of Europe (including Wales, Scotland, Ireland and Italy, Africa (containing South Africa, Zimbabwe, Kenya, Namibia, Uganda and Zambia), Asia (including Hong Kong, Fiji and Papua New Guinea), and in New Zealand, etc.

Cricket is internationally governed by International Cricket Council (ICC), which is headquartered in Dubai and includes representatives from the ten Test-playing nations and an elected panel representing non-Test-playing nations.

Each nation has a national cricket board which regulates cricket matches played in its country. The cricket board also selects the national squad and organises home and away tours for the national team.

Nations playing cricket are separated into three tiers depending on the level of cricket infrastructure in that country. At the highest level are the Test-playing nations; they qualify automatically for the quadrennial World Cup matches. Below these are the Associate Member nations. The lowest level consists of the Affiliate Member nations.

Comments

Add New